Rugged, inexpensive and simple machine. Framework and table in steel; cutting head sliding on structural steel beam; Angle legs; tilting head for 45 degree angle cuts. Inclination of the whole cutting unit by means of two hand-levers. Available in two versions (head travel and rise/fall): manual and automatic.
It is the top model of a range of machines particularly designed to cut corners in a very precise way. Its robust and solid structure is equipped with precision slides capable of ensuring exceptional cutting quality. The position of the cutting motor below the work surface means that, in most cases, the shiny part of the material is facing downwards and in contact with the machine surface covered with white rubber. It is equipped with a CNC that controls the cutting movement and the speed, the rotation speed of the diamond blade and 4 pneumatic pistons with 8 contact points for blocking the material. It is possible to cut pieces with a minimum width of 45 mm (with special hooks).
Equipped with a brushless motor that controls the cutting axis, it is able to advance at an adjustable speed from zero to 3 meters per minute. In rapid movements to return to the starting point, it reaches 17 meters per minute.
It is the first of a family of machines designed to cut corners very precisely. Its robust, compact structure and precision slides guarantee exceptional cutting quality. The position of the cutting motor below the work surface means that, in most cases, the shiny part of the material is facing downwards and in contact with the machine surface covered with white rubber. It is equipped with 4 pneumatic pistons for blocking the material, it can cut in both directions with adjustable speed and is equipped with an electromechanical system to interrupt the cuts to the desired size. The inclination of the disc is manually adjustable (+ - 5 °), as is the stop. Equipped with guide protection bellows.
It’s the top quality model of a range of machines especially studied for cutting corners in a very precise way. Its rugged, solid structure equipped with precision slides can assure an exceptional cut quality. The position of the cutting motor below the work surface means that, in most cases, the shiny part of the material is facing downwards and in contact with the machine bench covered with white rubber.. It is equipped with a CNC controlling the cutting movement and speed, the blade tilting from 90° to 45° step by step of 1° each, the diamond blade rotation speed and 4 pneumatic pistons with 8 contact points for blocking the material. It is possible to cut pieces of 45 mm minimum width (with appropriate clamps).
Scorpione is a squaring for cutting slab of marble and granite into elements of reduced length or prederminated. The work roller is equipped with stop for cutting the pieces to the extent desired. The cutting unit, slides on special guides wedge milled steel, along the cutting axis, while the vertical axis slides on chromed shafts and ground of large diameter. Two models available: manual or automatic.
